BJQFB - LIQUID TENT PATCHING ADHESIVE
- MSDS: BJQFB
- Manufacturer: TACC INTERNATIONAL CORP
- Product Name: LIQUID TENT PATCHING ADHESIVE
- National Stock Number: 8040-00-664-4946
Product Identification
Product ID:LIQUID TENT PATCHING ADHESIVE
MSDS Date:03/01/1986
FSC:8040
NIIN:00-664-4946
MSDS Number: BJQFB
Responsible Party
ROCKLAND, MA 02370
US
Emergency Phone: 617-878-7015
Info Phone: 617-878-7015
Cage: 0HZU1
Contractor
Telephone: 781-878-7015
Cage: 0HZU1
Ingredients
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 11-15%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ACETONE (SARA III)
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: 55-60%
OSHA PEL 1000PPM
ACGIH TLV: 750PPM/1000STEL;9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Health Hazards Acute and Chronic:EFFECTS OF OVEREXPOSURE TO SOLVENT
VAPORS COULD LEAD TO PERMANENT EFFECTS TO THE NERVOUS SYSTEM, BODY
ORGANS OR THE BRAIN.
Effects of Overexposure:HEADACHE, DIZZINESS NAUSEA, UPPER RESPIRATORY
DRYNESS OR IRRITATION, DROWSINESS, MENTAL DEPRESSION OR NARCOSIS,
DIFFICULTY IN BREATHING. EYES:IRRITATION. SKIN:REMOVAL OF SKIN
OILS. IRRITATION, DERMATI TIS, EVEN SENSITIZATION. INGESTION: MAYBE
HARMFUL OR FATAL IF SWALLOWED.
First Aid
First Aid:INHALATION:GET FRESH AIR. EYES:FLUSH WITH WATER FOR AT LEAST
15 MINUTES. IF NECESSARY CALL A PHYSICIAN. SKIN:WASH WITH SOAP AND
WATER, APPLY MILD SKIN CREAM. INGESTION: CALL POISON CENTER
IMMEDIATELY.
Fire Fighting
Flash Point Method:CC
Flash Point:< 0F/-18C
Lower Limits:1.1
Upper Limits:12.8
Extinguishing Media:FOAM, DRY CHEMICAL, CO2 WATER SPRAY OR FOG.
Fire Fighting Procedures:AVOID BREATHING SMOKE. USE AIR SUPPLIED RESCUE
EQUIPMENT FOR ENCLOSED AREA. WATER TENDS TO SPREAD BURNING LIQUID
IF LARGE AMOUNTS USED.
Unusual Fire/Explosion Hazard:EXTREME FLAMMABLE.VAPORS IGNIT
EXPLOSIVELY/CAUSE FLASH FIRES.ELIMINATE SOURCES OF IGNIT.NO
SMOKING.USE VENT SUFFICIENT TO REMOVE ODOR.ELECTRIC GROUND
CONTAINERS
Accidental Release
Spill Release Procedures:SMALL QUANTITIES MAY BE ABSORBED INTO AN
APPROPRIATE ABSORBENT.
Handling
Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN
USE.STORE @ 60-95F OUT OF SUN.USE ADEQUATE VENTILATION TO AVOID
BREATHING VAPOR WHEN COVER REMOVED.GROUND ALL EQUIP.
Exposure Controls
Respiratory Protection:IF VAPORS EXCEED TLV USE CONTAINED ORGANIC MASK
NIOSH APPROVED.
Ventilation:LOCAL EXHAUST SUFFICIENT TO KEEP WORKROOM CONCENTRATION
BELOW TLV.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:SAFETY GLASSES OR FACE SHIELD.
Other Protective Equipment:BARRIER CREAM FOR SENSITIVE SKIN.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:133F,56C
Vapor Pres:153 @ 20C
Vapor Density:> 1
Spec Gravity:0.86
Evaporation Rate & Reference:< 1 (BUTYL ACETATE =1)
Solubility in Water:NIL
Appearance and Odor:OPAQUE, KETONE ODOR
Percent Volatiles by Volume:70
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS AND BASES
Stability Condition to Avoid:FIRE, SPARKS, STATIC ELECTRICITY
Hazardous Decomposition Products:CO AND CO2
Disposal
Waste Disposal Methods:LIQUID MATERIAL IS DESIGNATED AS HAZARDOUS WASTE
UNTIL ALL SOLVENTS AND VAPORS HAVE EVAPORATED. DISPOSE OF IN
ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS. DRIED
ADHESIVE MAY BE DISPOSED OF AS ORDINARY WASTE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.